HP StorageWorks 2/16 - SAN Switch Nota de publicación - Página 4

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 10 páginas. Fabric os commands
También para HP StorageWorks 2/16 - SAN Switch: Manual de actualización (9 páginas), Manual de instrucciones de instalación (20 páginas), Manual del usuario (22 páginas), Notas de la versión del firmware (14 páginas), Nota de publicación (32 páginas), Nota de publicación (16 páginas), Manual de instalación (14 páginas), Manual de consulta rápida (5 páginas)

Imprimir página
HP StorageWorks 2/16 - SAN Switch Nota de publicación
NOTE:
HP software release policy is to carry forward all fixes in patches to subsequent
maintenance and feature releases of Fabric OS.

Supported switches

Fabric OS v3.2.1 supports the following switches:
•
HP StorageWorks SAN Switch 2/8
•
HP StorageWorks MSA SAN switch 2/8
•
HP StorageWorks SAN Switch 2/16
Fabric OS 3.2.1 updates
Table 1
lists Fabric OS 3.2.1 fixes.
Table 1
Issues resolved in this 3.2.1 release
Issue prior to Fabric OS 3.2.1
Third party tape drives did not respond to
Login (L) bit, based on switch lock L port
configuration.
After executing switchdisable or enable
in a large, secure fabric, some SAN Switch
2/16 models experienced queue overflow
and rebooted.
No monitoring of basic monitor service
without an Advanced Performance
Monitoring (APM) license.
config upload failed on switches
supporting a large Zone database.
SAN Switch 2/16 models panicked when
connected to a third party switch during
Zoning updates in Interop mode.
SAN Switch 2/16 models used incorrect
buffer-tobuffer (BB) credits when switch BB
credit was set less than device BB credit.
4
Supported switches
Fix
Third party tape drives working with SAN Switch 2/16.
SAN Switch 2/16 in large, secure fabrics do not
experience queue overflow messages and switch reboot.
Basic monitoring allowed without an Advanced
Performance Monitoring (APM) license.
API_MAX_CONFIG size is increased.
SAN Switch 2/16 models operate normally during
Zoning updates in Interop mode.
Fabric OS 3.2.1 uses same BB credit limit as
defined in switch.