HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM herunter. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 Seiten. 1u rackmount tape enclosure
Auch für HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Einbauanleitung (2 seiten), Installationsanleitung Handbuch (20 seiten), Freigabemitteilung (14 seiten), Einbauanleitung (2 seiten), Referenzhandbuch (46 seiten)
Seite drucken
Note:
and
4. Assemble the outer rails by completing the following steps:
Figure 4: Installing the outer rails (HP 9000 Series or comparable EIA rack)
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
This kit contains both left rails and right rails. The rails are marked with
Left
to distinguish the rails from each other.
a. Attach the left outer rail and the right outer rails to the rear mounting
brackets using (2) 1/4-20 hex nuts with captive star lock washers attached
loosely as shown in
tightened later in
Figure
4. Don't tighten them. The nuts will be
step
8.
Right
5
Addendum Pg