HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Interruptor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 páginas. 1u rackmount tape enclosure
También para HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Instrucciones de instalación (2 páginas), Manual de instrucciones de instalación (20 páginas), Nota de publicación (14 páginas), Instrucciones de instalación (2 páginas), Manual de referencia (46 páginas)

Note:

and

4. Assemble the outer rails by completing the following steps:

Figure 4: Installing the outer rails (HP 9000 Series or comparable EIA rack)

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

This kit contains both left rails and right rails. The rails are marked with

Left

to distinguish the rails from each other.

a. Attach the left outer rail and the right outer rails to the rear mounting

brackets using (2) 1/4-20 hex nuts with captive star lock washers attached

loosely as shown in

tightened later in

Figure

4. Don't tighten them. The nuts will be

step

Right

Addendum Pg