HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Interruptor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 páginas. 1u rackmount tape enclosure
También para HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Instrucciones de instalación (2 páginas), Manual de instrucciones de instalación (20 páginas), Nota de publicación (14 páginas), Instrucciones de instalación (2 páginas), Manual de referencia (46 páginas)

Figure 6: Assembling the outer rails (HP System/e rack)

5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with

Table 1: Number of screws required to assemble the inner rails

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head

screws with captive star lock washers and two #10 alignment washers in

the upper and lower hole locations of the right rail. Then install two

#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers

and two #10 alignment washers in the upper and lower hole locations of

the left rail. See

captive star lock washers required to assemble the inner rails by referring to

Table

Switch

SAN Switch 2/32

SAN Switch 2/16

SAN Switch 2/8

Figure

Number of #8-32 x 3/16-inch

Screws

Addendum Pg