HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 страниц. 1u rackmount tape enclosure
Также для HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Инструкции по установке (2 страниц), Руководство по установке (20 страниц), Примечание к выпуску (14 страниц), Инструкции по установке (2 страниц), Справочное руководство (46 страниц)

Figure 6: Assembling the outer rails (HP System/e rack)

5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with

Table 1: Number of screws required to assemble the inner rails

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head

screws with captive star lock washers and two #10 alignment washers in

the upper and lower hole locations of the right rail. Then install two

#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers

and two #10 alignment washers in the upper and lower hole locations of

the left rail. See

captive star lock washers required to assemble the inner rails by referring to

Table

Switch

SAN Switch 2/32

SAN Switch 2/16

SAN Switch 2/8

Figure

Number of #8-32 x 3/16-inch

Screws

Addendum Pg