HP Xw460c - ProLiant - Blade Workstation Management-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Management-Handbuch für Schalter HP Xw460c - ProLiant - Blade Workstation herunter. HP Xw460c - ProLiant - Blade Workstation 28 Seiten. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Auch für HP Xw460c - ProLiant - Blade Workstation: Handbuch zur Umsetzung (35 seiten), Handbuch zur Fehlervermeidung (12 seiten), Technisches Weißbuch (12 seiten), Firmware-Aktualisierung (9 seiten), Installationshandbuch (2 seiten), Handbuch für häufig gestellte Fragen (14 seiten), Poster einrichten (9 seiten), Installationshandbuch (33 seiten), Hardware-Handbuch (23 seiten), Übersicht (35 seiten), Benutzerhandbuch (33 seiten), Handbuch für die Optimierung (13 seiten), Eingeschränkte Garantie (10 seiten), Installationsanleitung Handbuch (10 seiten), Installationsanleitung Handbuch (8 seiten), Einbauanleitung (4 seiten), Einbauanleitung (2 seiten)

The Insight Display simplifies initial enclosure setup, facilitates local administration, and provides PIN-

based security. The Main Menu screen, depicted in Figure 3, provides access to the Initial Setup

Installation Wizard, Enclosure Management, Power Management, and HP BladeSystem Diagnostics.

The Enclosure Health icon on the bottom left corner of every screen indicates the health condition of

the enclosure.

The background color of the Insight Display varies with the health condition of the enclosure:

• Green—The enclosure is operating normally. No error or alert conditions exist.

• Blue—In configuration mode. The Insight Display is addressing a specific enclosure. The enclosure

unit identification (UID) light is automatically turned on when the enclosure is powered up for the

first time. The UID light and can be turned off or on from the Main Menu or by pressing the

enclosure UID button in the rear of each enclosure.

• Amber—An error or alert condition exists. If the enclosure UID is on and an error or alert condition

exists, the Insight Display illuminates blue because the enclosure UID takes priority over the alert.

• Dark—The Insight Display has a two-minute inactivity screen saver. If no action is taken and no alert

condition exists, the screen light turns off after two minutes. If an alert occurs after the screen saver

is activated, the screen backlight begins blinking. Pressing any button on the Insight Display will

reactivate the screen.

The Enclosure Settings and the Enclosure Info screens (Figure 4) provide access to management and

configuration capability and concise views of status information, respectively.

Figure 4. Illustration of the BladeSystem c-Class Insight Display Enclosure Settings and Enclosure Info screens