HP Xw460c - ProLiant - Blade Workstation Installationsanleitung Handbuch

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Schalter HP Xw460c - ProLiant - Blade Workstation herunter. HP Xw460c - ProLiant - Blade Workstation 10 Seiten. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Auch für HP Xw460c - ProLiant - Blade Workstation: Handbuch zur Umsetzung (35 seiten), Handbuch zur Fehlervermeidung (12 seiten), Technisches Weißbuch (12 seiten), Firmware-Aktualisierung (9 seiten), Installationshandbuch (2 seiten), Handbuch für häufig gestellte Fragen (14 seiten), Poster einrichten (9 seiten), Installationshandbuch (33 seiten), Management-Handbuch (28 seiten), Hardware-Handbuch (23 seiten), Übersicht (35 seiten), Benutzerhandbuch (33 seiten), Handbuch für die Optimierung (13 seiten), Eingeschränkte Garantie (10 seiten), Installationsanleitung Handbuch (8 seiten), Einbauanleitung (4 seiten), Einbauanleitung (2 seiten)

Seite drucken

HP Xw460c - ProLiant - Blade Workstation Installationsanleitung Handbuch

NVIDIA Quadro FX 560M installation instructions

HP ProLiant xw460c Blade Workstation

This kit contains a low-profile NVIDIA Quadro FX 560M graphics board. On an HP ProLiant xw460c Blade

Workstation that already contains a low-profile Quadro FX 560M board, a dual-graphics configuration can be

created by installing a second low-profile Quadro FX 560M board. Each Quadro FX 560M board supports two

monitors. For a four-monitor configuration, install two low-profile Quadro FX 560M boards.

Support for dual-graphics is provided on Microsoft® Windows® XP Professional only—dual-graphics is not

currently supported on Linux. The flowchart below shows the installation process to create a dual-graphics

Quadro FX 560M configuration—please review this flowchart carefully before proceeding. Steps 1-6 are

described subsequently.

Ensure that the correct BIOS and NVIDIA graphics driver are

STEP 1:

installed on the blade workstation. This is required to support dual-graphics.

STEP 2:

board is currently installed in the blade workstation.

This path will require

that you have two

low-profile Quadro

FX 560M boards

available.

Ensure that the RGS 5.1.1 (or later) is installed, and verify RGS operation.

STEP 6:

WARNING!

The NVIDIA Quadro FX 560M graphics board can only be installed in the HP ProLiant xw460c

Blade Workstation. The board is not compatible with the HP ProLiant BL460c Server Blade or any other

server blade—installing this card in a server blade will cause the server blade to malfunction.

*463919-002*

- 1 -

Use the Control Panel to determine what graphics

Quadro FX 560M

currently installed

Another type of

graphics board is installed

Open the blade workstation (if it

STEP 4B:

STEP 4B

isn't already open) and remove the current

graphics board. It will not be used further.

Insert the first low-profile Quadro FX 560M

STEP 5:

in the lower connector. Insert the second low-

profile Quadro FX 560M in the upper connector.

STEP 3:

determine if a low-profile or high-profile

Quadro

Quadro FX 560M is installed.

FX 560M

Invent logo is a registered trademark of Hewlett-Packard

Development Company, L.P. Printed in the U.S.

Open the blade workstation to

low-profile

FX 560M installed

high

profile

low profile

Remove the low-profile

STEP 4A:

Quadro FX 560M board. This is to

provide access to the connector

beneath the board.