HP Xw460c - ProLiant - Blade Workstation Manual de instruções de instalação

Procurar online ou descarregar pdf Manual de instruções de instalação para Interruptor HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 10 páginas. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Também para HP Xw460c - ProLiant - Blade Workstation: Manual de implementação (35 páginas), Manual de prevenção de erros (12 páginas), Livro Branco Técnico (12 páginas), Atualização do firmware (9 páginas), Manual de instalação (2 páginas), Manual de Perguntas Frequentes (14 páginas), Cartaz de instalação (9 páginas), Manual de instalação (33 páginas), Manual de gestão (28 páginas), Manual do hardware (23 páginas), Visão geral (35 páginas), Manual do utilizador (33 páginas), Manual de otimização (13 páginas), Garantia limitada (10 páginas), Manual de instruções de instalação (8 páginas), Instruções de instalação (4 páginas), Instruções de instalação (2 páginas)

Imprimir página
HP Xw460c - ProLiant - Blade Workstation Manual de instruções de instalação
NVIDIA Quadro FX 560M installation instructions
HP ProLiant xw460c Blade Workstation
This kit contains a low-profile NVIDIA Quadro FX 560M graphics board. On an HP ProLiant xw460c Blade
Workstation that already contains a low-profile Quadro FX 560M board, a dual-graphics configuration can be
created by installing a second low-profile Quadro FX 560M board. Each Quadro FX 560M board supports two
monitors. For a four-monitor configuration, install two low-profile Quadro FX 560M boards.
Support for dual-graphics is provided on Microsoft® Windows® XP Professional only—dual-graphics is not
currently supported on Linux. The flowchart below shows the installation process to create a dual-graphics
Quadro FX 560M configuration—please review this flowchart carefully before proceeding. Steps 1-6 are
described subsequently.
Ensure that the correct BIOS and NVIDIA graphics driver are
STEP 1:
installed on the blade workstation. This is required to support dual-graphics.
STEP 2:
board is currently installed in the blade workstation.
This path will require
that you have two
low-profile Quadro
FX 560M boards
available.
Ensure that the RGS 5.1.1 (or later) is installed, and verify RGS operation.
STEP 6:
WARNING!
The NVIDIA Quadro FX 560M graphics board can only be installed in the HP ProLiant xw460c
Blade Workstation. The board is not compatible with the HP ProLiant BL460c Server Blade or any other
server blade—installing this card in a server blade will cause the server blade to malfunction.
*463919-002*
- 1 -
Use the Control Panel to determine what graphics
Quadro FX 560M
currently installed
Another type of
graphics board is installed
Open the blade workstation (if it
STEP 4B:
STEP 4B
isn't already open) and remove the current
graphics board. It will not be used further.
Insert the first low-profile Quadro FX 560M
STEP 5:
in the lower connector. Insert the second low-
profile Quadro FX 560M in the upper connector.
STEP 3:
Y
determine if a low-profile or high-profile
Quadro
Quadro FX 560M is installed.
?
FX 560M
N
© 2008 Hewlett-Packard Development Company, LP. The HP
Invent logo is a registered trademark of Hewlett-Packard
Development Company, L.P. Printed in the U.S.
Open the blade workstation to
N
low-profile
FX 560M installed
high
?
profile
low profile
Y
Remove the low-profile
STEP 4A:
Quadro FX 560M board. This is to
provide access to the connector
beneath the board.