DiamondBoxx SUB8.2 Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Redner DiamondBoxx SUB8.2 herunter. DiamondBoxx SUB8.2 12 Seiten.

The Rear Panel

This is where you plug in the included charger to recharge your DiamondBoxx.

ONLY THE INCLUDED CHARGER (16.8 VDC, 2 Amps) OR MAJOR DAMAGE CAN

OCCUR.

The FULL and 80Hz HP jack can be used to connect to additional DiamondBoxx

subwoofers or other DiamondBoxx products or any other speaker with an AUX IN

jack. We recommend if connecting a Model M, M3, 40W, 40TWS, or any other

small size Bluetooth speaker to the subwoofer to use the 80Hz HP OUTPUT jack.

This jack is useful to remove the bass from the speaker connected to it and let the

SUB8.2 handle the low notes. Most smaller speaker systems will be able to play

louder when they don't have to try to reproduce the low notes, leave those for the

SUB8.2

The rear panel INPUT 1 jack and INPUT 2 jack can be connected to just about

anything with an audio output. This would include:



Output from another DiamondBoxx



Laptops, Tablets and Phones



Computers, gaming consoles, and projectors



Audio Mixers

If the item you want to plug in doesn't have the right jack, your local electronics or

music store will have an adapter.

These two jacks are mixed together so multiple audio sources can be played at

once or mixed together, they can be used simultaneously.

These connections can also be used to link multiple DiamondBoxxes together. By

plugging a 3.5mm Stereo cable into the OUT jack of one DiamondBoxx and into the

IN jack of another DiamondBoxx you will have double the sound. The first

DiamondBoxx will control the volume for both DiamondBoxxes. You can continue

to daisy-chain them like this up to concert sound levels!

TIP: Turn power off to all DiamondBoxxes involved during this process. Then turn

on the "Main" DiamondBoxx before turning on the next one.

BLUETOOTH

TIP: If using Bluetooth, turn the "Main" DiamondBoxx on first,

connect your Bluetooth device, then continue to turn on any other

DiamondBoxxes. The cable required is a standard

(sometimes called TRS) available at guitar or musical instrument store, or from our

website or an electronics supply store, or Amazon.

STEREO

3.5mm cable

USE