Panasonic RX-DT600 Betriebsanleitung - Seite 13
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic RX-DT600 herunter. Panasonic RX-DT600 21 Seiten. Portable stereo component system
Auch für Panasonic RX-DT600: Betriebsanleitung (21 seiten)
Selecting and listening to your favorite tracks (Program play)
Up to 16 tracks can be programmed.
1
Set SELECTOR
to "C3D"-
2
Press
\«/«
or ►►/►« to
select your favorite track.
(
-
1
—
V_
J
Press MEMORY to program
the track.
Lights.
Play sequence
programmed tracks
To program other tracks as well, repeat
steps 2 and 3.
To release program play:
In the stop mode, press ■/
CLEAR.
When "—:—" appears on the display:
This means that the total play time of the programmed tracks has
exceeded 100 minutes. Tracks can still be programmed and played.
When "FULL" appears on the display:
This means that an attempt has been made to program 17 tracks.
No more tracks can be programmed.
For your reference:
Memory retention of programmed tracks:
The programming of the tracks will be retained in the memory even
if play is stopped at any time or the power is turned off.
This indicates that the track programming is retained.
/
IPQffl
^
r
<
-
-
i
tone
'
tUUJI
To check what has been programmed:
Press ►*«/«*« or ►►/►« when "P" is displayed.
The programmed track numbers and the play sequence will now
appear.
The programming is cleared by opening the disc lid.
Press 0/11 to start play.
The tracks are now played in the pro¬
grammed sequence, after which play will
stop automatically.
4