Panasonic RX-DT610 Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic RX-DT610 herunter. Panasonic RX-DT610 46 Seiten. Portable stereo component system

Seite drucken

PLAYING A DISC

M@ Program play

Up to 16 tracks can be programmed.

1. Press the skip/search button (</<<

or >P/PP) to

specify the desired track.

Press the skip/search button repeatedly until the desired

track appears.

2. Press the memory/recall button.

The play sequence is first indicated and after 2 seconds,

the time of the whole play sequence is displayed.

Program indicator

Total playing time for specified tracks

3. Repeat the steps 1—2 to be played in sequence.

(PGM)

"FULL" appears and flashes on the display when the

program memory is already full. This is to indicate that no

more additional track can be programmed.

4. Press the play/pause button.

Play starts in the programmed sequence.

®To stop the program play

Press the stop/clear button.

Play will stop automatically when all the programmed tracks

have been played through.

(Play will stop and the play program will be retained.)

eChecking what has been program

The tracks which have been programmed

and the play

sequence can be checked for about 1 second when the

memory/recall button is pressed in the stop mode.

@ Clearing a program

@Clearing all the programmed tracks

(Cancelling the programmed play mode)

1. Press the memory/recall button in the stop mode.

The program indicator will start to flash on the display for

several seconds.

2. Press the stop/clear button while the program indicator is

flashing.

The program indicator goes out and the programming is

cleared.

ENGL

Clearing only the track programmed last

Press the stop/clear button in the stop mode.

Each time the button is pressed, the track programmed last

can be cleared in sequence.

Example: When tracks 3, 5 and 7 have been programmed,

the tracks will be cleared in the sequence of 7, 5 and 3 each

time the stop/clear button is pressed.

The programmed mode will be cancelled if you open the

disc holder.

Note:

It is not possible to clear only a track located in the

middle of the program (such as the third of 5 tracks).