diatesse XPER TD-4289B Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blutzuckermessgerät diatesse XPER TD-4289B herunter. diatesse XPER TD-4289B 15 Seiten. Blood glucose & ketones monitoring system

Seite drucken

SETTING UP THE METER

Before using your meter for the first time or

whenever replacing its batteries, check and

adjust the following settings:

Open the setup mode (a)

The meter is switched off (a test strip is not

inserted).Press the button marked S beside

the batteries.

1. Setting the date

The sequence for setting the date is

YEAR ➞ MONTH ➞ DAY. When YEAR/

MOTH/DAY are flashing consecutively,

press the button marked M to select the

correct setting. Next, press S.

2. Setting the date format

Press the main button M on the front of

the meter to select the required date

format (12 or 24 hour). Then press S.

3. Setting the time

When HOUR/MINUTE are flashing

consecutively, press the button marked M

until the correct time is displayed. Then

press S.

4. Turning sound effects on/off

For sound effects press the button marked

M on the display to switch between "On"

and "Off" Then press S.

5. To set a reminder

Your meter has four reminder settings.

The meter displays "ON" or "OFF" and

If you do not want to set a reminder

notification, then press S to skip this step.

Otherwise press the button marked M to

select "ON" and then press S.

When the hour/minute are flashing, press

M to select the desired hour/minutes.

Then press S and continue to the next

alarm setup.

PLEASE NOTE: When the reminder

notification goes off, press M to switch it

off. The reminder will sound for 2 minutes

and then switch off automatically.

6. Turning on Bluetooth

(Bluetooth® is optional)

When "bt" is visible on the display press

M and select "ON" or "OFF". Then press S.

PLEASE NOTE: This means that data is

transferred using Bluetooth®.

If you select "ON", then the results are

transmitted immediately after the test.

NOTE:

• ALL of these parameters can be changed

in the setup mode.

• If the meter is not used for a period of

3 minutes while in setup mode,

it switches off automatically.

Measuring methods:

for blood sugar testing

You can measure your blood sugar levels

in three different ways: General, AC (before

meals) and PC (after meals). You can switch

between the different modes as follows:

1. Start with the meter switched off.

Insert a blood sugar test strip into the slot

to turn the meter on. The display shows ,

" flashing " " and "GLU".

2. Press M to switch between General,

AC and PC.

For β-ketone testing

3. There is only one option for measuring

your β-ketone levels: Gen. Start with the

meter switched off. Insert a β-ketone test

strip into the slot to turn the meter on. The

display shows "

", a flashing" ", "Gen"

and "KET".

QUALITY CONTROL TEST

When should you test the device

using control solution?

You do not need to perform a test with

the control solution when first using the

Diatesse XPER.

• When you think that either the meter or

the test strips are defective.

• When your test results do not match the

way you are feeling, or when you believe

the results are not accurate.

• When performing a test.

• If you have dropped the meter or have

reason to believe it is damaged.

Test strips (c), control solution (d), lancing

device (e) or sterile lancets (f) might not be

included in the kit (please check the list of

contents on your product's packaging). These

articles can be ordered separately. Ensure that

you have a sufficient supply of all the articles

you require for performing tests.

Performing a test with

the control solution.

In order to perform a test with the control

solution, you require (b), (c) and (d).

1. Insert the test strip into the slot to turn

the meter on.

Wait until the meter displays"

" and

a flashing " ".

2. Apply the control solution (g)

Shake the bottle of control solution well

before use. Squeeze out the first droplet

and wipe it off. Squeeze another droplet

onto the point of the bottle's cap. Hold the

meter so that the absorbent opening of

the test strip comes into contact with

the drop and absorbs the control solution.

Once the control window contains

sufficient control solution, the meter starts

an automatic countdown.