HTC VIVE DEVELOPER Setup-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Virtual-Reality-Headsets HTC VIVE DEVELOPER herunter. HTC VIVE DEVELOPER 8 Seiten.

Connect headset to computer through inter-

face box. Short cables connect to PC, long

3 in1 cable connects to headset. See 17 & 18.

Refer to forum for min PC specs.

Use outside knob to adjust distance between

lenses. This accomodates narrow or wide set

eyes. Start in the middle if unsure.

Remove lens film, see appendix for care.

Interface box is directional. 'PC' side connects

to short computer cables, 'VR' side connects to

black ends of headset 3 in 1 cable.

Turn power switch ON. LED will light up.

Plug USB, power and the

cable into top of headset. (HDMI is one way)

Left two ports remain free (Audio & USB)

Thread cables through loop on top of strap.

Space for eyewear can be created by extending

face gasket out and re-tightening inside knob.

Having lenses closer to your eye results in bet-

ter field of view.

DARK BLUE

end of HDMI