HTC VIVE DEVELOPER Посібник з налаштування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з налаштування для Гарнітури віртуальної реальності HTC VIVE DEVELOPER. HTC VIVE DEVELOPER 8 сторінок.
Друкувати сторінку
16
Connect headset to computer through inter-
face box. Short cables connect to PC, long
3 in1 cable connects to headset. See 17 & 18.
Refer to forum for min PC specs.
19
Use outside knob to adjust distance between
lenses. This accomodates narrow or wide set
eyes. Start in the middle if unsure.
Remove lens film, see appendix for care.
17
Interface box is directional. 'PC' side connects
to short computer cables, 'VR' side connects to
black ends of headset 3 in 1 cable.
Turn power switch ON. LED will light up.
18
Plug USB, power and the
cable into top of headset. (HDMI is one way)
Left two ports remain free (Audio & USB)
Thread cables through loop on top of strap.
20
Space for eyewear can be created by extending
face gasket out and re-tightening inside knob.
Having lenses closer to your eye results in bet-
ter field of view.
DARK BLUE
end of HDMI