Dictator E8 Technisches Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Kontrollsysteme Dictator E8 herunter. Dictator E8 19 Seiten.

Technical Manual E8

Page 05.023.12

III. Adjustment / Programming - cont.

Parameters P-6 to P-9:

Adjustments only required when using door operators with

integrated position control and „P-b" is adjusted to the value

000.

IMPORTANT: If errors have occurred during the adjustment of the final

positions the control system can be returned to the default settings by a

RESET of the control system adjustment. Disconnect the control

system shortly, move the door to its closed position, switch on the current

again. Then adjust the parameters P-6, P-7 and P-8 to „000" and start

anew with the adjustments as described below.

The display has to show rising (positive) numbers when the door opens.

In case negative numbers appear, check the connection of the position

control system.

„P-6" Adjustment of the position control system: position

„Door CLOSED"

Before starting the adjustment of the positions, please make sure that

tha parameter P-b is adjusted to the value „000".

The first position to be entered when using a drive unit with integrated

position control system is the closed position.

Close the door completely and adjust the value with the arrow keys

and

to „0" .

„P-7" Adjustment of the position control system: position

„Door OPEN"

Move the door with the OPEN-switch to the position Door OPEN. Note

the value shown in P-0 and enter then this value in P-7, using the arrow

membrane keys

and

The value of the position Door OPEN must always be higher than the

value adjusted in P-8 for the position „Crawling speed OPEN".

„P-8" Adjustment of the position control system: position

„Crawling speed OPEN"

When reaching this position the control system automatically reduces

the speed to the crawling speed (adjusted with parameter P-1).

The value of this position should be about 50 digits less than that of the

position Door OPEN.

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200703