Olympus CAMEDIA C-220 ZOOM Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Digitalkamera Olympus CAMEDIA C-220 ZOOM herunter. Olympus CAMEDIA C-220 ZOOM 2 Seiten. Olympus corporation product manual

Seite drucken

Olympus CAMEDIA C-220 ZOOM Schnellstart-Handbuch

C-2 Zoom

D-520 ZOOM

C-220 ZOOM

DIGITAL CAMERA

Quick start guide

We've included this convenient Quick start guide to show you basic functions and

techniques that will help you quickly master your new camera. For more detailed

descriptions of procedures, as well as for additional information on more sophisticated

features not covered here, please refer to the printed "Basic Manual", or the primary

"Reference Manual" on the CD-ROM.

Package contents

Camera

CD-ROM with Windows 98 USB driver

Strap

software, Reference manual, and more.

AA (R6) alkaline batteries (2 pieces)

Warranty card/Registration card (not

Video cable

provided in some areas)

USB cable

Safety Precautions (booklet)

Basic manual

SmartMedia

Quick start guide

Static-free case

Software installation guide (included in

Index labels (2 pieces)

the CD-ROM package)

Write-protect adhesive seals (4 pieces)

SmartMedia instructions

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

24/7 online automated help: http://support.olympusamerica.com/

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery: Wendenstraße 14-18, 20097 Hamburg, Germany

Tel. 040-237730

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

http://www.olympus.com/

Printed in Japan

3 Shooting/Playback

Taking still pictures

1 1 1 1

Open the lens barrier.

Orange lamp

Slide the lens barrier open until it clicks.

The flash pops up and the lens extends.

2 2 2 2

Position the AF target mark over the

subject in the viewfinder.

AF target mark

3 3 3 3

Press the shutter button gently (halfway).

The green lamp on the right of the viewfinder

lights up when the focus and exposure are

locked. At this time the sound of the focusing

mechanism can be heard from inside the

camera, but no picture is being taken.

4 4 4 4

Press the shutter button all the way (fully).

The camera takes the picture.

Playing back still pictures

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on and displays the last picture taken.

2 2 2 2

Press

to display the previous/next picture.

3 3 3 3

Jumps to the picture 10 frames behind.

Press

to cancel playback.

Displays the

The monitor and camera

next picture.

turn off.

Displays the

previous picture.

Jumps to the picture 10 frames ahead.

1 Getting started

Attaching the strap

1 1 1 1

Thread the short end of the strap through the

strap eyelet.

2 2 2 2

Thread the long end of the strap through the

loop that has already gone through the

eyelet.

3 3 3 3

Pull the strap tight, making sure that it is

securely fastened and does not come loose.

Loading the batteries

1 1 1 1

Make sure that:

The lens barrier

is closed.

The lamp on the right

of the viewfinder is off.

2 2 2 2

Slide the battery compartment

cover in the direction of

(the

direction indicated by the

mark on the cover), and lift it up in

the direction of

3 3 3 3

Insert the batteries, making sure

that they are correctly oriented as

shown in the illustration.

When using AA

When using a

(R6) batteries

lithium battery

pack

VT351301

Recording movies

1 1 1 1

Press

with the lens barrier open.

The top menu in the shooting mode is displayed.

2 2 2 2

Press

to select DRIVE.

3 3 3 3

Press

to select

, then press

4 4 4 4

Record the movie while observing your

Green

subject on the monitor.

lamp

Press the shutter button fully to start recording.

Press the shutter button fully again to stop

recording.

Playing back movies

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on.

2 2 2 2

Press

to display the desired picture with a

press

The top menu is displayed.

3 3 3 3

Press

to select MOVIE PLAYBACK.

The movie is played back after the orange lamp on the right of the viewfinder

blinks and the movie data is downloaded to the camera. When the movie

reaches the end, the display returns automatically to the beginning of the movie.

4 4 4 4

Press

to display the MOVIE

PLAYBACK menu. Then select the

desired operation and press

PLAYBACK:

Plays back the entire

movie again.

FRAME BY FRAME:

Plays back the movie

manually one frame at a

time.

EXIT:

Leaves the movie playback mode.

4 4 4 4

Close the battery compartment cover in the

direction of

. While pressing the

slide the cover in the direction of

Strap

eyelet

If the battery compartment cover will not close easily, do

not force it. Try pressing the

Inserting the card (SmartMedia)

1 1 1 1

Make sure that:

The lens barrier

is closed.

2 2 2 2

Open the card cover.

The monitor

is off.

3 3 3 3

Insert the card as far as it will go in the

direction shown in the illustration.

There is an arrow inside the card cover, indicating

Battery

the direction in which the card should be inserted.

insertion

4 4 4 4

direction

Close the card cover securely until it clicks

mark

Removing the card.

Hold the card with your fingertips and pull it out in the

direction of the arrow.

Never open the card cover, or remove the card or the batteries while the

camera is turned on. Doing so could destroy all data on the card. Destroyed

data cannot be restored.

4 Erasing pictures

Single-frame erase

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on.

2 2 2 2

Press

to select the picture you want to erase.

3 3 3 3

Press

The top menu is displayed.

4 4 4 4

Press

to select

5 5 5 5

Press

to select YES, then

press

The picture is erased and the menu is closed.

indicator, then

• Erasure is not possible if the picture you want to erase is protected or a

write-protect seal is attached to the card. Before erasing, unprotect the

picture or remove the write-protect seal from the card.

• Once erased, pictures cannot be restored. Check each picture before

erasing to avoid accidentally erasing pictures you want to keep.

2 Turning the power on/off

When shooting pictures

mark,

Power on:

Open the lens barrier.

The camera turns on in the

mark with both hands.

shooting mode. The lens

extends and the flash pops up.

If the lens does not extend, the

lens barrier is not fully open.

Open the lens barrier until it

clicks.

The monitor is off.

The lamp on the right of

the viewfinder is off.

When playing back pictures

Power on:

Press the

with the lens barrier closed.

The camera turns on in the

playback mode. The monitor

turns on.

Card insertion

direction mark

With the lens

barrier closed

5 Protecting pictures (Protect)

You are recommended to protect important pictures to avoid accidentally erasing

them.

1 1 1 1

Press

The monitor turns on.

2 2 2 2

Press

3 3 3 3

Press

The mode menu is displayed.

ERASE.

4 4 4 4

Press

5 5 5 5

Press

press

6 6 6 6

Press

The selected picture is protected.

To close the menu, press

Power off:

Close the lens barrier slightly

until it just touches the lens

barrier.

Wait until the lens is fully

retracted, then close the lens

barrier completely.

The camera turns off. (The

monitor also turns off.)

Press the flash down manually

until it locks in place.

Power on

Power off

Power off:

(monitor) button

Press the

(monitor)

button.

The camera turns off (the

monitor turns off).

Power ON

Power OFF

To save battery power, the camera automatically enters the sleep mode

after about 3 minutes of non-operation. If the monitor is on, it will

automatically turn off. The camera activates again as soon as you lightly

press the shutter button or zoom lever. Whenever possible, turn the camera

off when you do not intend to take any pictures for a while.

with the lens barrier closed.

to select the picture you want to protect.

, then press

to select the PLAY tab, then press

to select

, then

to select ON.

twice.

• The

indicator is displayed at the top right of the protected picture.

• Protection on each picture remains even when the camera is turned off.

• Protected pictures cannot be erased by the single-frame/all-frame erase

function, but they can be all erased with the format function.

• Protection cannot be applied to pictures stored on a card with a write-

protect seal.