デジタルカメラ Olympus CAMEDIA C-220 ZOOMのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA C-220 ZOOM 2 ページ。 Olympus corporation product manual
![Olympus CAMEDIA C-220 ZOOM クイック・スタート・マニュアル](/uploads/products/server2/4261269/4261269.jpg)
C-2 Zoom
C-2 Zoom
C-2 Zoom
C-2 Zoom
D-520 ZOOM
D-520 ZOOM
D-520 ZOOM
D-520 ZOOM
C-220 ZOOM
C-220 ZOOM
C-220 ZOOM
C-220 ZOOM
DIGITAL CAMERA
Quick start guide
We've included this convenient Quick start guide to show you basic functions and
techniques that will help you quickly master your new camera. For more detailed
descriptions of procedures, as well as for additional information on more sophisticated
features not covered here, please refer to the printed "Basic Manual", or the primary
"Reference Manual" on the CD-ROM.
Package contents
Camera
CD-ROM with Windows 98 USB driver
Strap
software, Reference manual, and more.
AA (R6) alkaline batteries (2 pieces)
Warranty card/Registration card (not
Video cable
provided in some areas)
USB cable
Safety Precautions (booklet)
Basic manual
SmartMedia
Quick start guide
Static-free case
Software installation guide (included in
Index labels (2 pieces)
the CD-ROM package)
Write-protect adhesive seals (4 pieces)
SmartMedia instructions
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
24/7 online automated help: http://support.olympusamerica.com/
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
Premises/Goods delivery: Wendenstraße 14-18, 20097 Hamburg, Germany
Tel. 040-237730
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
http://www.olympus.com/
Printed in Japan
3 Shooting/Playback
Taking still pictures
1 1 1 1
Open the lens barrier.
Orange lamp
Slide the lens barrier open until it clicks.
The flash pops up and the lens extends.
2 2 2 2
Position the AF target mark over the
subject in the viewfinder.
AF target mark
3 3 3 3
Press the shutter button gently (halfway).
The green lamp on the right of the viewfinder
lights up when the focus and exposure are
locked. At this time the sound of the focusing
mechanism can be heard from inside the
camera, but no picture is being taken.
4 4 4 4
Press the shutter button all the way (fully).
The camera takes the picture.
Playing back still pictures
1 1 1 1
Press
with the lens barrier closed.
The monitor turns on and displays the last picture taken.
2 2 2 2
Press
to display the previous/next picture.
3 3 3 3
Jumps to the picture 10 frames behind.
Press
to cancel playback.
Displays the
The monitor and camera
next picture.
turn off.
Displays the
previous picture.
Jumps to the picture 10 frames ahead.
1 Getting started
Attaching the strap
1 1 1 1
Thread the short end of the strap through the
strap eyelet.
2 2 2 2
Thread the long end of the strap through the
loop that has already gone through the
eyelet.
3 3 3 3
Pull the strap tight, making sure that it is
securely fastened and does not come loose.
Loading the batteries
1 1 1 1
Make sure that:
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
2 2 2 2
Slide the battery compartment
cover in the direction of
(the
direction indicated by the
mark on the cover), and lift it up in
the direction of
.
3 3 3 3
Insert the batteries, making sure
that they are correctly oriented as
shown in the illustration.
When using AA
When using a
(R6) batteries
lithium battery
pack
VT351301
Recording movies
1 1 1 1
Press
with the lens barrier open.
The top menu in the shooting mode is displayed.
2 2 2 2
Press
to select DRIVE.
3 3 3 3
Press
to select
, then press
.
4 4 4 4
Record the movie while observing your
Green
subject on the monitor.
lamp
Press the shutter button fully to start recording.
Press the shutter button fully again to stop
recording.
Playing back movies
1 1 1 1
Press
with the lens barrier closed.
The monitor turns on.
2 2 2 2
Press
to display the desired picture with a
press
.
The top menu is displayed.
3 3 3 3
Press
to select MOVIE PLAYBACK.
The movie is played back after the orange lamp on the right of the viewfinder
blinks and the movie data is downloaded to the camera. When the movie
reaches the end, the display returns automatically to the beginning of the movie.
4 4 4 4
Press
to display the MOVIE
PLAYBACK menu. Then select the
desired operation and press
.
PLAYBACK:
Plays back the entire
movie again.
FRAME BY FRAME:
Plays back the movie
manually one frame at a
time.
EXIT:
Leaves the movie playback mode.
4 4 4 4
Close the battery compartment cover in the
direction of
. While pressing the
slide the cover in the direction of
Strap
eyelet
If the battery compartment cover will not close easily, do
not force it. Try pressing the
Inserting the card (SmartMedia)
1 1 1 1
Make sure that:
The lens barrier
is closed.
2 2 2 2
Open the card cover.
The monitor
is off.
3 3 3 3
Insert the card as far as it will go in the
direction shown in the illustration.
There is an arrow inside the card cover, indicating
Battery
the direction in which the card should be inserted.
insertion
4 4 4 4
direction
Close the card cover securely until it clicks
mark
Removing the card.
Hold the card with your fingertips and pull it out in the
direction of the arrow.
Never open the card cover, or remove the card or the batteries while the
camera is turned on. Doing so could destroy all data on the card. Destroyed
data cannot be restored.
4 Erasing pictures
Single-frame erase
1 1 1 1
Press
with the lens barrier closed.
The monitor turns on.
2 2 2 2
Press
to select the picture you want to erase.
3 3 3 3
Press
.
The top menu is displayed.
4 4 4 4
Press
to select
5 5 5 5
Press
to select YES, then
press
.
The picture is erased and the menu is closed.
indicator, then
• Erasure is not possible if the picture you want to erase is protected or a
write-protect seal is attached to the card. Before erasing, unprotect the
picture or remove the write-protect seal from the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
2 Turning the power on/off
When shooting pictures
mark,
Power on:
.
Open the lens barrier.
The camera turns on in the
mark with both hands.
shooting mode. The lens
extends and the flash pops up.
If the lens does not extend, the
lens barrier is not fully open.
Open the lens barrier until it
clicks.
The monitor is off.
The lamp on the right of
the viewfinder is off.
When playing back pictures
Power on:
Press the
with the lens barrier closed.
The camera turns on in the
playback mode. The monitor
turns on.
Card insertion
direction mark
With the lens
barrier closed
5 Protecting pictures (Protect)
You are recommended to protect important pictures to avoid accidentally erasing
them.
1 1 1 1
Press
The monitor turns on.
2 2 2 2
Press
3 3 3 3
Press
The mode menu is displayed.
ERASE.
4 4 4 4
Press
5 5 5 5
Press
press
6 6 6 6
Press
The selected picture is protected.
To close the menu, press
Power off:
Close the lens barrier slightly
until it just touches the lens
barrier.
Wait until the lens is fully
retracted, then close the lens
barrier completely.
The camera turns off. (The
monitor also turns off.)
Press the flash down manually
until it locks in place.
Power on
Power off
Power off:
(monitor) button
Press the
(monitor)
button.
The camera turns off (the
monitor turns off).
Power ON
Power OFF
To save battery power, the camera automatically enters the sleep mode
after about 3 minutes of non-operation. If the monitor is on, it will
automatically turn off. The camera activates again as soon as you lightly
press the shutter button or zoom lever. Whenever possible, turn the camera
off when you do not intend to take any pictures for a while.
with the lens barrier closed.
to select the picture you want to protect.
, then press
.
to select the PLAY tab, then press
.
to select
, then
.
to select ON.
twice.
• The
indicator is displayed at the top right of the protected picture.
• Protection on each picture remains even when the camera is turned off.
• Protected pictures cannot be erased by the single-frame/all-frame erase
function, but they can be all erased with the format function.
• Protection cannot be applied to pictures stored on a card with a write-
protect seal.