Axium AX250i Handbuch für Installation und Betrieb - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Verstärken Axium AX250i herunter. Axium AX250i 13 Seiten. Two zone: two stereo pre-amplifiers & amplifiers with rs232, keypad & ir control

FRONT PANEL OPERATION

Speaker select &
Infra-Red
2 digit
Function
Front panel Keypad
Amp-On indicators
Receiver
Display
indicators
SELECT
The SELECT button toggles the amplifier zone/speaker for which the front panel keypad is addressing.
This is indicated by the Green Zone select LED'' (A, B, C & D)
It is also used as an 'enter key' when setting the amplifier zone.
FUNCTION
The FUNCTION button toggles between BASS, TREBLE, BALANCE & ZONE.
Once a function is selected (corresponding LED FUNCTION indicator) the parameter may be edited using
the VOL UP & DOWN buttons. For example to adjust the BASS settings on zone 1, make sure that the
Speaker A or B indicator LED is lit (green) and the Zone is ON. Press the FUNCTION button until the BASS
indicator LED is illuminated. You can then increase or decrease the BASS by pressing the VOL UP
(increase) or DOWN (decrease). The FUNCTION level/value is indicated on the 2-digit display.
The Zone is selectable between 0 – 31 and must be set in memory by pressing the SELECT button.
FUNCTION mode is terminated after 4 seconds of inactivity or by toggling past the last FUNCTION (ZONE).
STANDBY
Standby toggles the selected speaker output ON or OFF.
Amp-On indicators (RED LED's) provide standby status.
VOL UP & DOWN
VOL UP & DOWN control the selected Zone's volume in 2.5db steps.
If the zone is muted, then pushing either VOL Up or DOWN will un-mute the amplifier.
MUTE
The MUTE button toggles the selected Zone's muting.
The 2-digit display flashes while muted.
CD
Selects the CD input source
TAPE
Selects the TAPE input source
TUNER
Selects the TUNER input source
AUX
Selects the AUX input source
5