Axium AX250i Kurulum ve Kullanım Kılavuzu - Sayfa 7

Amplifikatör Axium AX250i için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Axium AX250i 13 sayfaları. Two zone: two stereo pre-amplifiers & amplifiers with rs232, keypad & ir control

Sayfayı Yazdır

1. Specifications

FRONT PANEL OPERATION

Speaker select &

Infra-Red

2 digit

Function

Front panel Keypad

Amp-On indicators

Receiver

Display

indicators

SELECT

The SELECT button toggles the amplifier zone/speaker for which the front panel keypad is addressing.

This is indicated by the Green Zone select LED'' (A, B, C & D)

It is also used as an 'enter key' when setting the amplifier zone.

FUNCTION

The FUNCTION button toggles between BASS, TREBLE, BALANCE & ZONE.

Once a function is selected (corresponding LED FUNCTION indicator) the parameter may be edited using

the VOL UP & DOWN buttons. For example to adjust the BASS settings on zone 1, make sure that the

Speaker A or B indicator LED is lit (green) and the Zone is ON. Press the FUNCTION button until the BASS

indicator LED is illuminated. You can then increase or decrease the BASS by pressing the VOL UP

(increase) or DOWN (decrease). The FUNCTION level/value is indicated on the 2-digit display.

The Zone is selectable between 0 – 31 and must be set in memory by pressing the SELECT button.

FUNCTION mode is terminated after 4 seconds of inactivity or by toggling past the last FUNCTION (ZONE).

STANDBY

Standby toggles the selected speaker output ON or OFF.

Amp-On indicators (RED LED's) provide standby status.

VOL UP & DOWN

VOL UP & DOWN control the selected Zone's volume in 2.5db steps.

If the zone is muted, then pushing either VOL Up or DOWN will un-mute the amplifier.

MUTE

The MUTE button toggles the selected Zone's muting.

The 2-digit display flashes while muted.

Selects the CD input source

TAPE

Selects the TAPE input source

TUNER

Selects the TUNER input source

AUX

Selects the AUX input source