Olympus BH2 Series Zerlegung, Reinigung und Wiederzusammenbau - Seite 23

Blättern Sie online oder laden Sie pdf Zerlegung, Reinigung und Wiederzusammenbau für Mikroskop Olympus BH2 Series herunter. Olympus BH2 Series 45 Seiten. Phase contrast
Auch für Olympus BH2 Series: Handbuch zur Fehlersuche und -anpassung (46 seiten), Vollständige Demontage, Reinigung und Wiedermontage (23 seiten), Vollständige Demontage, Reinigung und Wiedermontage (40 seiten), Handbuch (6 seiten), Installationshandbuch (9 seiten)

Figure 79 – Remove the slotted diaphragm stop pin

Using a suitable JIS screwdriver, loosen and remove the

two m2.6x5 screws holding the plastic gear collar in

place on the diaphragm rotor. See

Figure 80 – Remove two screws securing the gear collar

Lift and remove the plastic gear collar from the

diaphragm rotor if it will come loose. See

Figure 81 – Lift and remove the plastic gear collar

Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames

Figure

80.

Figure

81.

Using a suitable JIS screwdriver, loosen and remove the

four m2.6x5 screws securing the brass retaining plate

onto the metal diaphragm stator. See

Figure 82 – Remove screws securing brass plate to stator

Lift and remove the brass retaining plate from the metal

diaphragm stator. See

Figure

Figure 83 – Lift and remove the brass retaining plate

Carefully lift and remove the diaphragm rotor from the

metal diaphragm stator. See

Figure 84 – Carefully lift and remove the diaphragm rotor

Figure

82.

83.

Figure

84.

Revision 1

Page 23 of 45