Olympus BH2 Series Desmontaje, limpieza y montaje - Página 23

Navegue en línea o descargue pdf Desmontaje, limpieza y montaje para Microscopio Olympus BH2 Series. Olympus BH2 Series 45 páginas. Phase contrast
También para Olympus BH2 Series: Manual de solución de problemas y ajuste (46 páginas), Desmontaje, limpieza y montaje completos (23 páginas), Desmontaje, limpieza y montaje completos (40 páginas), Manual (6 páginas), Manual de instalación (9 páginas)

Figure 79 – Remove the slotted diaphragm stop pin

Using a suitable JIS screwdriver, loosen and remove the

two m2.6x5 screws holding the plastic gear collar in

place on the diaphragm rotor. See

Figure 80 – Remove two screws securing the gear collar

Lift and remove the plastic gear collar from the

diaphragm rotor if it will come loose. See

Figure 81 – Lift and remove the plastic gear collar

Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames

Figure

80.

Figure

81.

Using a suitable JIS screwdriver, loosen and remove the

four m2.6x5 screws securing the brass retaining plate

onto the metal diaphragm stator. See

Figure 82 – Remove screws securing brass plate to stator

Lift and remove the brass retaining plate from the metal

diaphragm stator. See

Figure

Figure 83 – Lift and remove the brass retaining plate

Carefully lift and remove the diaphragm rotor from the

metal diaphragm stator. See

Figure 84 – Carefully lift and remove the diaphragm rotor

Figure

82.

83.

Figure

84.

Revision 1

Page 23 of 45