Olympus BX2 SERIES Wartungshandbuch - Seite 18
Blättern Sie online oder laden Sie pdf Wartungshandbuch für Mikroskop Olympus BX2 SERIES herunter. Olympus BX2 SERIES 29 Seiten. Olympus microscope bx2
Auch für Olympus BX2 SERIES: Informationen (6 seiten)
Seite drucken
BX2 MAINTENANCE MANUAL
2-2 Confirmation of X-wire tension
*1
2-3 Confirmation of Y-wire tension
F
Note: If the wire is too tight, image backlash may occur.
If the tension is below the standard value, slip may occur between the knob
and the wire deteriorating the image movement.
REPAIR PROCEDURE
A
C
D
B
B
A
*1
1) Move the X-guide "A" to the center of
the upper stage "B" , press"C" of the
X-wire using the fan-shaped tension
gauge(OT3232). If the tension does not
meet the standard, adjust the tension
so as to be within the standard when
the X-wire comes into contact with "D"
wall by means of the CSK3X5SA(*1)
screw.
Tension standard
1) Press the upper part of Y-wire "A" indicated
by the the arrow with the fan-shaped
tension gauge. If the tension does not meet
the standard, adjust the CSK3X5SA(*1)
scew so that the tension is within the
standard when the Y-wire comes into
contact with "F" part of the lower stage "B"
when seen from the above.
Tension standard
- 15 -
0.25-0.3N(25-30gf)
0.88-0.98N(90-100gf)