Olympus BX51 Anleitung Handbuch - Seite 27

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX51 herunter. Olympus BX51 40 Seiten. System
Auch für Olympus BX51: Betriebshandbuch (17 seiten), Anleitung Handbuch (34 seiten), Anleitung Handbuch (37 seiten), Betriebshandbuch (11 seiten)

Seite drucken

Problem

c) Image cannot be focused.

d) Coarse adjustment will not go all

the way up.

e) Coarse adjustment will not go all

the way down.

f ) Objective makes contact with

specimen before focus is obtained.

4. Observation Tube

a) Field of view of one eye does not

match that of the other.

5. Stage

a) Image shifts when you touch stage. Stage is not properly mounted.

b) Specimen stops midway on the X-

axis traverse.

c) Horizontal and/or X- and Y-axis

knobs are too tight or too loose.

d) Stroke has reduced.

Cause

When adjusting stage height, you forgot

to reattach upper stopper screw.

Pre-focusing lever is locked at a too low

height.

Condenser holder is too low.

Specimen is mounted upside down.

Interpupillary distance is incorrect.

Incorrect diopter adjustment.

Different eyepieces are used on left and

right.

Your view is not accustomed to micro-

scope observation.

Specimen is not correctly positioned.

Tension of horizontal and/or X- and Y-

axis knobs is too high or too low.

Stage guide is deviated.

Remedy

Reattach upper stopper screw.

Unlock pre-focusing lever.

Raise condenser holder.

Mount specimen correctly.

Adjust interpupillary distance.

Adjust diopter.

Change on eyepiece to match the

other so that both sides are the same

type.

Upon looking into eyepieces, try look-

ing at overall field before concentrat-

ing on specimen range. You may also

find it helpful to look up and into dis-

tance for a moment before looking

back into microscope.

Clamp stage.

Place specimen correctly.

Adjust tension.

Use treatment method described on

page 13.

BX51

Page

– –