Olympus BX60 Anleitung Handbuch - Seite 27

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX60 herunter. Olympus BX60 48 Seiten. System microscope
Auch für Olympus BX60: Schnellstart-Handbuch (4 seiten)

Seite drucken

fig 39

Fig, 41

1. Turn the coarse adjustment knob ® to lower the stage.

2. Open the spring-loaded curved linger (D on the specimen holder and

place tha specimen slides en the stags from the front

3. After placing the specimen as far as it will go. gentty release the curved

finger. (Fig, 39)

♦ When obsarving very large specimens, remove the specimen

holder and use the stage es a plane stage.

U-S1C4

After loosening the specimen holder clamping screws ©i slide tha

specimen holder apart to place the specimen. Clamp the specimen

holder by tightening the clamping screws ©. (Fig. 40)

Adjusting the TenslorTof

the X-axis and Y-axis Khbfi* >*> "i *

O The tension of the X-axis and Y-exis knobs can be individuatty adjusted.

Turning the X adjustment knob ® or the Y adjustment knob <j) counter-

dodcwise increases tension, and turning them clockwise reduces tension.

When adjusting the tension, hold the X-axis and Y-axis knobs to keep

them from turning along with the tension adjustment knobs.

O If the tension is adjusted too tight creaking sounds may be heard

dunng stags travel, and the stage may return back to its original position

when stopped. (Fig. 41)

I U-SIC4

O This stage has no provision for tension adjustment

1. When the Y-axis lock lever <J is engaged, travel along the Y-exis is

blocked while scan in the X-axis direction is free.

2. When releasing the lock lever, make sure to return the lever to its

original position. (Fig. 42)

Fig. 42