Olympus CK30 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus CK30 herunter. Olympus CK30 39 Seiten. Culture microscope

2-2 Detailed Assembly Procedure

Fig. 3

Fig. 4

@ ²

Fig. 5

Mounting and Replacing the Bulb

}Use only the specified Philips 5761 halogen bulb, 6 V 30 W HAL .

To prevent reduced bulb life or cracking, do not touch the bulb with

bare hands. If fingerprints are accidentally left on the bulb, wipe the

bulb with a soft cloth.

1. Hold the bulb @ with gauze or other protective material and insert the

bulb pins ² into the lamp socket's pin holes ³ as far as they will go.

# Insert the bulb gently. Squeezing too hard will damage the bulb.

Bulb replacement during use or after use:

The bulb and the lamp socket surfaces and vicinity will be extremely

hot during use and right after use. Set the main switch to " \ " (OFF)

and disconnect the power cord from the wall outlet. Then allow the

old bulb, lamp housing and vicinity to cool before replacing the bulb.

Installing the Transmitted Illumination Unit

1. While aligning the indicator groove ² on the transmitted illumination unit

@ with the notch ³ on the lamp housing support´s brace, insert the

illumination unit @ gently into the support's brace.

2. Turn the illumination unit @ 90° clockwise so that " AS " on the filter

holder faces directly to the front. Then tighten the clamping screw ƒ

using the Allen wrench provided with the microscope body to fix it se-

curely.

Installing the Lamp Socket

1. Connect the plug @ with the socket pin ². Then, while aligning the

guide pins ³ with the condenser's guide holes |, push the lamp socket

gently onto the Illumination unit.

CK30/CK40

(Fig. 3)

(Fig. 4)

(Fig. 5)