Olympus CX23 Anleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus CX23 herunter. Olympus CX23 32 Seiten. Biological microscope

CAUTION - Electrical safety -

Always use the AC adapter and power cord provided by Olympus.

If the proper AC adapter and power cord are not used, the electric safety and EMC (Electro-Magnetic Compatibility )

performance of the device can not be assured. If no power cord is provided, please select the proper power cord by

referring to the section "Proper selection of the power supply cord" at the end of this instruction manual.

Ground the device.

Connect the ground terminal of the power cord and that of the power outlet. If the device is not grounded, our intended

electric safety and EMC performance of the device can not be assured.

Do not use the device in close proximity to the sources of strong electromagnetic radiation.

Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of the

device.

Remove the power cord in case of emergency.

Install the product at a location where you can reach the power cord connector or the power outlet at hand to remove

the power cord quickly.

This device complies with the emission and immunity requirements described in IEC61326 series.

Do not directly look at the light from the LED unit for a long time.

If you feel that the light from LED units is too bright during observation, adjust the intensity using the brightness

adjustment knob and continue observation. The LED built in this product is basically eye-safe. However, direct viewing

the light from the LED unit for extended time in the state you feel dazzling may cause damage to the eyes.

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Indicates a non-specific general hazard. Follow the description given after this

symbol or in the instruction manual.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Explanation