Olympus U-EXBAUB Anleitung Handbuch - Seite 32

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus U-EXBAUB herunter. Olympus U-EXBAUB 42 Seiten.

9

ASSEMBLY

9-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any
parts or touching glass surfaces.
Assembly steps enclosed in
}All assembly operations are possible by using the Allen screwdriver (
Allen wrench (
) provided with the motorized reflected light illuminator is used only for clamping the screws inside the
illuminator. (To retain the performance, have your local Olympus representative conduct this work.)
NOTES
· Be sure to insert the sliders in the orientations shown in the diagram. Otherwise, they cannot be fitted in click positions
and engaged correctly in the light path.
Eyepiece
Turret
UV cut Plate
Fluorescence
mirror units
Objectives/Motorized
revolving nosepiece
Light shield sheets
will be detailed on the subsequent pages.
Mercury burner
USH102D
HBO103W/2
Observation
tube
Lamp housing
clamping screw
Illuminator
clamping
screws
Motorized reflected
fluorescence
illuminator
BX-RFAA
Microscope frame
BX61TRF
BX62TRF, etc.
) provided with the microscope. The
Mercury lamp
housing
U-LH100HG
U-LH100HGAPO
Exciter balancer
U-EXBABG
U-EXBAUB
U-EXBAUG
ND filters
U-25ND6
U-25ND25
Rectangular field stop
BX-RFSS
6-position filter slider
U-RSL6
Analyzer
U-AN
6-position barrier filter slider
U-AN360-3
U-RSL6EM
Power cord
Power supply unit
(for 100 W mercury
burner)
29