Axkid Kidzone Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Autositz Axkid Kidzone herunter. Axkid Kidzone 13 Seiten.
the strap. When installing in the front seat the
strap has to be attached under the seat.
Pull out the strap(1) to an appropriate
length. Secure the fastening device in the loop
of the car or the strap. Repeat on the other side.
Tighten the straps by firmly pulling the end
strap.
Unfold the support leg (2) to its maximal
angle. Pull the latch on the upper length ad-
juster (3) and pull down the leg so that it gets
in contact with the car's floor. If the leg still can-
not reach the floor, repeat on the bottom length
adjuster (3).
Now you could try to firmly pull the straps
to make sure that your seat is fully secured.
If you have mounted the child seat in the
rear seat of the car, move the front seat to a com-
fortable location. The seat's backside can, but
must not, have contact with the car seat.
Adjust the seat belt
Place the child in the child seat. Place the
child's arms in between the shoulder straps so
that the shoulder straps are hanging over the
chest and stomach of the child. Put together the
shoulder belts and fasten the buckle between
the child's legs. Pull the adjustment strap (4).
This will tighten the belt and the headrest will
automatically slide down to the proper height.
To loosen the belt, hold down belt adjustment
and pull both belts.
1
2
3
4
7
2