- ページ 7

チャイルドシート Axkid KidzoneのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Axkid Kidzone 13 ページ。

the strap. When installing in the front seat the

strap has to be attached under the seat.

Pull out the strap(1) to an appropriate

length. Secure the fastening device in the loop

of the car or the strap. Repeat on the other side.

Tighten the straps by firmly pulling the end

strap.

Unfold the support leg (2) to its maximal

angle. Pull the latch on the upper length ad-

juster (3) and pull down the leg so that it gets

in contact with the car's floor. If the leg still can-

not reach the floor, repeat on the bottom length

adjuster (3).

Now you could try to firmly pull the straps

to make sure that your seat is fully secured.

If you have mounted the child seat in the

rear seat of the car, move the front seat to a com-

fortable location. The seat's backside can, but

must not, have contact with the car seat.

Adjust the seat belt

Place the child in the child seat. Place the

child's arms in between the shoulder straps so

that the shoulder straps are hanging over the

chest and stomach of the child. Put together the

shoulder belts and fasten the buckle between

the child's legs. Pull the adjustment strap (4).

This will tighten the belt and the headrest will

automatically slide down to the proper height.

To loosen the belt, hold down belt adjustment

and pull both belts.