Olympus CKX41 Anleitung Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus CKX41 herunter. Olympus CKX41 36 Seiten. Reflected fluorescence system
Auch für Olympus CKX41: Übersicht (7 seiten), Broschüre & Specs (4 seiten), Reparatur-Handbuch (43 seiten)

Seite drucken

Fig. 13

Fig. 14

Attaching the CKX-RFA Reflected

Fluorescence Illuminator

1. Gently insert the illuminator into the place from which the

dummy cover has been removed.

2. Using the Allen wrench, tighten the three screws provided

with the illuminator.

# Push the illuminator down while tightening the screws

so that the illuminator does not go upward.

}The filter slider 3 may obstruct the lower one of the screw

holes 2. Adjust the filter slider so that the open position or

the filter pocket is placed over the lower screw hole when

clamping the illuminator.

Attaching the Fluorescent Mirror Slider

Attach the fluorescent mirror slider, removed in

attach the washer and tighten the screw.

Attaching the Dust Covers

}The dust covers on the left and right are identical.

1. Align the mounting hole 2 of the dust cover 1 and the

screw hole 3 of the holding side of the slider and lightly

secure the clamping knob 4 with your hand.

2. To prevent the dust cover 1 from interfering with the fluores-

cent mirror slider and revolving nosepiece, push the dust

cover downward as well as inward and secure the clamp-

ing knob tightly using the Allen wrench.

3. Attach the dust cover on the opposite side in the same way

as above.

(Fig. 13)

above,

(Fig. 14)