Olympus R1 Anleitung Handbuch - Seite 45

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus R1 herunter. Olympus R1 47 Seiten. Cell counter
Auch für Olympus R1: Kurzreferenz-Handbuch (2 seiten)

Seite drucken

CHAPTER 7 – POWER CORD SELECTION

If a power cord has not been provided, please select the proper power cord for the instrument by referring to

the Specifications and Certified Cords table below.

If you use a non-approved power supply for Olympus products, Olympus can no longer warrant the

electrical safety of the instrument.

Specifications

Voltage Rating

Current Rating

Temperature Rating

Length

Fittings Configuration

Table 1: Certified Cords

A power cord should be certified by one of the agencies listed in the following table, or comprised of cordage

marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one

of the agencies listed in Table 1. In case you are unable to buy locally in your country the power supply cord

which is approved by one of the agencies mentioned in Table 1, please use replacements approved by any other

equivalent and authorized agencies in your country.

Country

Australia

Austria

Belgium

Canada

Denmark

Finland

France

Germany

Ireland

125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)

6A minimum

60°C minimum

3.05 m maximum

Grounding type attachment plug cap.

Opposite terminates in molded-on IEC configuration appliance coupling.

Certification

Agency

Mark

SAA

ÖVE

CEBEC

CSA

DEMKO

FEI

UTE

VDE

NSAI

Country

Italy

Japan

Netherlands

Norway

Spain

Sweden

Switzerland

United Kingdom

U.S.A

Certification

Agency

Mark

IMQ

JET, JQA

KEMA

NEMKO

AEE

SEMKO

SEV

ASTA,BSI