Olympus R1 Manual de instrucciones - Página 45
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de laboratorio Olympus R1. Olympus R1 47 páginas. Cell counter
También para Olympus R1: Manual de consulta rápida (2 páginas)
Imprimir página
CHAPTER 7 – POWER CORD SELECTION
If a power cord has not been provided, please select the proper power cord for the instrument by referring to
the Specifications and Certified Cords table below.
If you use a non-approved power supply for Olympus products, Olympus can no longer warrant the
electrical safety of the instrument.
Specifications
Voltage Rating
Current Rating
Temperature Rating
Length
Fittings Configuration
Table 1: Certified Cords
A power cord should be certified by one of the agencies listed in the following table, or comprised of cordage
marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one
of the agencies listed in Table 1. In case you are unable to buy locally in your country the power supply cord
which is approved by one of the agencies mentioned in Table 1, please use replacements approved by any other
equivalent and authorized agencies in your country.
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Ireland
125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
6A minimum
60°C minimum
3.05 m maximum
Grounding type attachment plug cap.
Opposite terminates in molded-on IEC configuration appliance coupling.
Certification
Agency
Mark
SAA
ÖVE
CEBEC
CSA
DEMKO
FEI
UTE
VDE
NSAI
Country
Italy
Japan
Netherlands
Norway
Spain
Sweden
Switzerland
United Kingdom
U.S.A
44
Certification
Agency
Mark
IMQ
JET, JQA
KEMA
NEMKO
AEE
SEMKO
SEV
ASTA,BSI
UL