Accurate Technology Digi Scale Model 10 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Accurate Technology Digi Scale Model 10 herunter. Accurate Technology Digi Scale Model 10 17 Seiten.

S
3
ECTION
Digi Scale is easy to install. By following the installation basics in this manual, you are
assured of reliable, error-free operation without any need for adjustments or
modifications.
Because Digi Scale can be installed on, or used in, many types of equipment or
applications, all installations are a little different. Therefore, it's the responsibility of the
installer to choose bolts, screws, or other mounting hardware that guarantees proper
installation.
Note: If you ordered a Digi-Kit" product that contains instructions for installation on or
for a specific product, (ie Digi Fence or Digi Stop) follow those installation instructions
rather than the instructions presented here.
1. Determine an appropriate mounting location for the Digi Scale. The scale should be
mounted to a stationary part of the device. The Encoder then slides along the scale,
using the supplied guide clip to transfer movement to the Encoder. The Readout
should be mounted in a location which allows for easy viewing by the operator. The
location of the parts should also safeguard the cable from possible damage.
2. Drill and countersink any necessary holes and mount the scale using M4 (or #8)
flathead screws. It may be necessary to use washers or spacers to ensure a good
mount if the scale is to be mounted on an uneven surface. Be sure the screw heads
do not protrude above the surface of the extrusion. If they do, they will interfere with
the Encoder.
Check that the scale is properly aligned with the direction of motion of the moving
part.
Accurate Technology Digi Scale
D
S
-20
IGI
CALE
Page 9 of 17