Accurate Technology Digi Scale Model 10 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Accurate Technology Digi Scale Model 10. Accurate Technology Digi Scale Model 10 17.

Stampa la pagina

ECTION

Digi Scale is easy to install. By following the installation basics in this manual, you are

assured of reliable, error-free operation without any need for adjustments or

modifications.

Because Digi Scale can be installed on, or used in, many types of equipment or

applications, all installations are a little different. Therefore, it's the responsibility of the

installer to choose bolts, screws, or other mounting hardware that guarantees proper

installation.

Note: If you ordered a Digi-Kit" product that contains instructions for installation on or

for a specific product, (ie Digi Fence or Digi Stop) follow those installation instructions

rather than the instructions presented here.

1. Determine an appropriate mounting location for the Digi Scale. The scale should be

mounted to a stationary part of the device. The Encoder then slides along the scale,

using the supplied guide clip to transfer movement to the Encoder. The Readout

should be mounted in a location which allows for easy viewing by the operator. The

location of the parts should also safeguard the cable from possible damage.

2. Drill and countersink any necessary holes and mount the scale using M4 (or #8)

flathead screws. It may be necessary to use washers or spacers to ensure a good

mount if the scale is to be mounted on an uneven surface. Be sure the screw heads

do not protrude above the surface of the extrusion. If they do, they will interfere with

the Encoder.

Check that the scale is properly aligned with the direction of motion of the moving

part.

Accurate Technology Digi Scale

-20

IGI

CALE

Page 9 of 17