digico D5 Live Schnellstart-Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Mischpult digico D5 Live herunter. digico D5 Live 18 Seiten. Digital console

Setup & Installation Manual

The change the resolution requires changes to internal set up files of the embedded control computer and

this should only be done by a technician familiar with PC software set-up operations. See setup notes

following.

Changing Overview screen set-up..................................................

The change the overview screen resolution requires changes to the Windows set-up and the D5 set-up

files.

Note that D5 uses a "stripped" version of Windows98. This is for reliablity and speed of loading. For exam-

ple, right clicking on the desktop will not get to properties to allow change of screen settings. The following

shows how this can be done in the D5. Read these instructions before trying to change the settings!

1 With system running, Quit from D5 to Windows (touch system, service, quit to Windows).

2 Using the trackball, Open Explorer by double clicking the desktop icon. The touch screens do not work

outside of D5 itself.

3 go to c:\admin and find desk.clm This is an executable file. This runs the desktop display properties

window. Tab to settings.

4 Settings shows the 5 screens. Light the top screen, by clicking on it 1 time. This the over screen. With

the slide bar below, setting the correct resolution for your screen. Use 256 colours or High colour only.

5 If the position of screen number 1 changes, ensure the left hand edge of this screen lines up with the

other 4 sceens (the mixer internal screens). Note all left hand edges should be in straight line vertically.

6 click on apply, click on OK to change desktop settings and close this and the Poperties window.

7 Return to Explorer. Find C:\D5\D5.ini this is the set-up file for the D5. We recommend making a copy of

this file in the c:\backup folder before proceeding.

8 Double click on D5.ini, this will open in Notepad.

9 find the lines

overviewwidth=nnn

overviewhieght=nnn

change the value of nnn to the appropriate value

e.g.

overviewwidth=1280

overviewvhieght=1024

These values MUST match what has been set in the display properties.

DO NOT change any other settings in D5.ini, otherwise the mixer may stop working completely! (hence to

need to back this file up first)

10 click on Notepad file drop menu, click on save

click on Notepad file drop menu, click on exit

11 The new settings should not be in place. Click on the D5 to restart the program.

Page 14