digico SD7 Technische Hinweise - Seite 6

Blättern Sie online oder laden Sie pdf Technische Hinweise für Mischpult digico SD7 herunter. digico SD7 11 Seiten. Replacing and cleaning faders
Auch für digico SD7: Handbuch (9 seiten)

Seite drucken
digico SD7 Technische Hinweise
TN198 Page 6 of 11
The image below shows the Engine with the Optocore Board fitted.
The Following Connections now need to be made :
1 x Serial Connection from Optocore Board to PC
2 x Optical Fibre Connections from Optocore Board to Rear Panel of Engine*
* If you have ordered a 2 Loop Upgrade Kit, you will be provided with 4 HMA-LC Fibre Cables
Note that the network (RJ45 / Cat 5 connections) are not implemented at this time.
No RJ45 cables need to be connected.
Install Ribbon cable provided to connect between the Upper serial port (COM1) of the PC and the
10 way header on the optical card. It is easiest to fit the PC end of the cable first. When connected,
secure with the hex head bolts provided.
TN198.doc\