digico SD7 Uwagi techniczne - Strona 6

Przeglądaj online lub pobierz pdf Uwagi techniczne dla Mikser digico SD7. digico SD7 11 stron. Replacing and cleaning faders
Również dla digico SD7: Podręcznik (9 strony)

Drukuj stronę
digico SD7 Uwagi techniczne
TN198 Page 6 of 11
The image below shows the Engine with the Optocore Board fitted.
The Following Connections now need to be made :
1 x Serial Connection from Optocore Board to PC
2 x Optical Fibre Connections from Optocore Board to Rear Panel of Engine*
* If you have ordered a 2 Loop Upgrade Kit, you will be provided with 4 HMA-LC Fibre Cables
Note that the network (RJ45 / Cat 5 connections) are not implemented at this time.
No RJ45 cables need to be connected.
Install Ribbon cable provided to connect between the Upper serial port (COM1) of the PC and the
10 way header on the optical card. It is easiest to fit the PC end of the cable first. When connected,
secure with the hex head bolts provided.
TN198.doc\