Axxess AX Series Installationsanleitung Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Kraftfahrzeuge Axxess AX Series herunter. Axxess AX Series 8 Seiten.
Seite drucken
Dual assignment instructions (long button press)
The AX-TYAMP2-SWC has the capability to assign (2) functions to a single button, except Volume-
Up and Volume-Down. Follow the steps below to program the button(s) to your liking.
Note: Seek-Up and Seek-Down come pre-programmed as Preset-Up and Preset-Down
for a long button press.
1. Turn on the ignition but do not start the vehicle.
2. Press and hold down the steering wheel control button that you want to assign a long press
function to for about (10) seconds, or until the L.E.D. flashes rapidly. At this point release the
button; the L.E.D. will then go solid.
3. Press and release the Volume-Up button the number of times corresponding to the new button
number selected. Refer to the Dual Assignment Legend. The L.E.D. will flash rapidly while the
Volume-Up button is being pressed, and then go back to a solid L.E.D. once released. Go to the
next step once the Volume-Up button has been pressed the desired number of times.
Caution: If more than (10) seconds elapses between pressing the Volume-Up button, this
procedure will abort, and the L.E.D. will go out.
4. To store the long press button in memory, press the button that you assigned a long press
button to (the button held down in Step 2). The L.E.D. will now go off indicating the new
information has been stored.
Note: These steps must be repeated for each button you would like to assign a dual
purpose feature to. To reset a button back to its default state, repeat Step 1, and then
press the Volume-Down button. The L.E.D. will go out, and the long press mapping for
that button will be erased.
STEERING WHEEL CONTROL SETTINGS
(CONT)
Dual assignment legend
1. Not allowed
6. ATT/Mute
7. Preset-Up
2. Not allowed
8. Preset-Down
3. Seek-Up/Next
9. Power
4. Seek-Down/Prev
5. Mode/Source
10. Band
* Not applicable in this application
11. Play/Enter
15. Fan-Up *
12. PTT
16. Fan-Down *
13. On-Hook
17. Temp-Up *
14. Off-Hook
18. Temp-Down *
REV. 7/24/2018 INSTAX-TYAMP2-SWC
7