Axxess AX Series Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Axxess AX Series. Axxess AX Series 8 страниц.

Dual assignment instructions (long button press)

The AX-TYAMP2-SWC has the capability to assign (2) functions to a single button, except Volume-

Up and Volume-Down. Follow the steps below to program the button(s) to your liking.

Note: Seek-Up and Seek-Down come pre-programmed as Preset-Up and Preset-Down

for a long button press.

1. Turn on the ignition but do not start the vehicle.

2. Press and hold down the steering wheel control button that you want to assign a long press

function to for about (10) seconds, or until the L.E.D. flashes rapidly. At this point release the

button; the L.E.D. will then go solid.

3. Press and release the Volume-Up button the number of times corresponding to the new button

number selected. Refer to the Dual Assignment Legend. The L.E.D. will flash rapidly while the

Volume-Up button is being pressed, and then go back to a solid L.E.D. once released. Go to the

next step once the Volume-Up button has been pressed the desired number of times.

Caution: If more than (10) seconds elapses between pressing the Volume-Up button, this

procedure will abort, and the L.E.D. will go out.

4. To store the long press button in memory, press the button that you assigned a long press

button to (the button held down in Step 2). The L.E.D. will now go off indicating the new

information has been stored.

Note: These steps must be repeated for each button you would like to assign a dual

purpose feature to. To reset a button back to its default state, repeat Step 1, and then

press the Volume-Down button. The L.E.D. will go out, and the long press mapping for

that button will be erased.

STEERING WHEEL CONTROL SETTINGS

(CONT)

Dual assignment legend

1. Not allowed

6. ATT/Mute

7. Preset-Up

2. Not allowed

8. Preset-Down

3. Seek-Up/Next

9. Power

4. Seek-Down/Prev

5. Mode/Source

10. Band

* Not applicable in this application

11. Play/Enter

15. Fan-Up *

12. PTT

16. Fan-Down *

13. On-Hook

17. Temp-Up *

14. Off-Hook

18. Temp-Down *

REV. 7/24/2018 INSTAX-TYAMP2-SWC