Epson 3880 - Stylus Pro Color Inkjet Printer Netzwerk-Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Netzwerk-Handbuch für Drucker Epson 3880 - Stylus Pro Color Inkjet Printer herunter. Epson 3880 - Stylus Pro Color Inkjet Printer 39 Seiten. Printer
Auch für Epson 3880 - Stylus Pro Color Inkjet Printer: Broschüre (3 seiten), Spezifikationen (2 seiten), Broschüre & Specs (8 seiten), Hier beginnen (2 seiten), Start Here Handbuch (6 seiten), Eingeschränkte Garantie (12 seiten), Farbmanagement-Handbuch (47 seiten), Broschüre & Specs (8 seiten), Netzwerk-Handbuch (38 seiten), Schnellstart-Handbuch (2 seiten)

7. Press r, then press u or d to choose one of the following IP configuration

settings:

❏ Choose AUTO if your network uses a DHCP server to provide IP

addresses automatically. The printer's IP address will be obtained from

the DHCP server whenever the printer is reset or turned on.

❏ Choose PANEL if you would like to set the printer's IP settings manually.

❏ Choose PING to set the printer's IP address using the arp command.

The IP address is set when the printer is turned off and then back on.

8. Press

. An asterisk ( ) appears next to the setting you selected.

9. Press l to go back, then do one of the following:

❏ If you selected AUTO as the IP address setting, press the

Reset button to exit the printer menu. Then continue with step 14.

❏ If you selected PANEL as the IP address setting, continue with step 10.

❏ If you selected PING as the IP address setting, press the

Reset button to exit the printer menu. Print a network status sheet to

determine the printer's MAC address (see "Printing a Network Status

Sheet" on page 19). Then use the arp command to set the IP address

from a computer on the same segment of your network as the printer.

Type the arp command on the command line using this format (where

X is the IP address you want to assign and Y is the MAC address):

arp -s XXX.XXX.XXX.XXX YY-YY-YY-YY-YY-YY

After typing the command, continue with step 14.

10. Press d to highlight IP,SM,DG SETTING, then press r. The LCD displays

the IP address.

11. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the subnet mask.

12. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the default gateway.

Setting Up Your System for Network Printing

Cancel/