- ページ 18

プリンター Epson 3880 - Stylus Pro Color Inkjet PrinterのPDF ネットワーク・マニュアルをオンラインで閲覧またはダウンロードできます。Epson 3880 - Stylus Pro Color Inkjet Printer 39 ページ。 Printer
Epson 3880 - Stylus Pro Color Inkjet Printer にも：パンフレット (3 ページ), 仕様 (2 ページ), パンフレット＆スペック (8 ページ), ここからスタート (2 ページ), スタート・ヒア・マニュアル (6 ページ), 限定保証 (12 ページ), カラーマネジメント・マニュアル (47 ページ), パンフレット＆スペック (8 ページ), ネットワーク・マニュアル (38 ページ), クイック・スタート・マニュアル (2 ページ)

7. Press r, then press u or d to choose one of the following IP configuration

settings:

❏ Choose AUTO if your network uses a DHCP server to provide IP

addresses automatically. The printer's IP address will be obtained from

the DHCP server whenever the printer is reset or turned on.

❏ Choose PANEL if you would like to set the printer's IP settings manually.

❏ Choose PING to set the printer's IP address using the arp command.

The IP address is set when the printer is turned off and then back on.

8. Press

. An asterisk ( ) appears next to the setting you selected.

9. Press l to go back, then do one of the following:

❏ If you selected AUTO as the IP address setting, press the

Reset button to exit the printer menu. Then continue with step 14.

❏ If you selected PANEL as the IP address setting, continue with step 10.

❏ If you selected PING as the IP address setting, press the

Reset button to exit the printer menu. Print a network status sheet to

determine the printer's MAC address (see "Printing a Network Status

Sheet" on page 19). Then use the arp command to set the IP address

from a computer on the same segment of your network as the printer.

Type the arp command on the command line using this format (where

X is the IP address you want to assign and Y is the MAC address):

arp -s XXX.XXX.XXX.XXX YY-YY-YY-YY-YY-YY

After typing the command, continue with step 14.

10. Press d to highlight IP,SM,DG SETTING, then press r. The LCD displays

the IP address.

11. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the subnet mask.

12. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the default gateway.

Setting Up Your System for Network Printing

Cancel/