Digiever DS-4100-RM Handbuch zur Schnellinstallation - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Netzwerk-Hardware Digiever DS-4100-RM herunter. Digiever DS-4100-RM 11 Seiten.
Seite drucken
(2) 2.5-inch hard disks and SSD hard disks:
Place the hard disk into the area of the disk tray outlined in red (see picture
below). Make sure that the mounting holes on the bottom of the hard disk and
disk tray are lined up. Secure the drive with four screws.
④ Slide
the
disk tray onto the rails of the disk bay. Using the latch, gently push the disk tray
into the disk bay.
Secure the disk tray in place by pushing down on the latch. The latch should close
easily and snap in with an audible 'click'. Please make sure that the disk tray is pushed
all the way into the disk bay before attempting to secure the latch.
⑤ Once the
latch
is secure, you can lock it by using the disk tray lock.
Using a flathead screwdriver, turn the lock counterclockwise to lock the latch
mechanism. Turning the lock clockwise will unlock it.
Un-lock:
Lock:
6