Digiever DS-4100-RM Manual de instalação rápida - Página 7

Procurar online ou descarregar pdf Manual de instalação rápida para Hardware de rede Digiever DS-4100-RM. Digiever DS-4100-RM 11 páginas.

(2) 2.5-inch hard disks and SSD hard disks:

Place the hard disk into the area of the disk tray outlined in red (see picture

below). Make sure that the mounting holes on the bottom of the hard disk and

disk tray are lined up. Secure the drive with four screws.

④ Slide

the

disk tray onto the rails of the disk bay. Using the latch, gently push the disk tray

into the disk bay.

Secure the disk tray in place by pushing down on the latch. The latch should close

easily and snap in with an audible 'click'. Please make sure that the disk tray is pushed

all the way into the disk bay before attempting to secure the latch.

⑤ Once the

latch

is secure, you can lock it by using the disk tray lock.

Using a flathead screwdriver, turn the lock counterclockwise to lock the latch

mechanism. Turning the lock clockwise will unlock it.

Un-lock:

Lock: