Creek Audio VOYAGE i20 Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Verstärken Creek Audio VOYAGE i20 herunter. Creek Audio VOYAGE i20 19 Seiten.

QUICK SET-UP

For experienced hi-fi users, the Voyage i20 is an extremely easy and intuitive integrated amplifier to use. Please read the following instructions to

get set-up and running quickly:

Place the amplifier on a stable flat surface with easy access to the terminals at the rear and controls at the front. Avoid blocking the ventilation

slots in the top and bottom of the case.

Plug the mains cable (cord) provided into the IEC socket on the rear panel. Plug the mains plug into the nearest wall socket or a good quality

extension socket strip.

Connect a good quality speaker cable from each loudspeaker to the binding posts on the rear of the amplifier. Make sure the cables are terminat-

ed with either 4mm plugs or spade lugs. Bare wire is not recommended as frayed wires can cause short circuits between the terminals.

Connect an analogue source product, such as a streamer/DAC or Voyage CD DAC, with interconnect cables to one of the four analogue inputs.

Alternatively, connect a digital product like a computer, laptop, music streamer, or TV to one of the five digital inputs.

Power-up your source product and prepare to stream or play music to the amplifier via analogue or digital inputs.

Switch-on the amplifier by pressing the rocker switch on the back panel to position 1 (ON). The Standby symbol will light on the display screen.

Press either left or right control knobs briefly to wake-up the amplifier from Standby.

Rotate the right-hand control knob to adjust the volume.

The left-hand knob selects Inputs and Menu. Rotate it left or right to select the desired input or push it to access the Menu and rotate the knob to

select different options. Press the knob again to enter the menu options.

Press the input knob for two seconds to manually enter Standby. Standby mode will be entered automatically if no signal is amplified for 30

minutes or more.

The Remote-control handset operation should be self-explanatory, but some functions may require more explanation.