Cres Cor CO151FWUA12DE2083 Handbuch für Installation, Betrieb und Wartung - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Konvektionsofen Cres Cor CO151FWUA12DE2083 herunter. Cres Cor CO151FWUA12DE2083 15 Seiten. Humidity convection ovens

Seite drucken

Convection

Humidity Oven

Page 6 of 14

Rev. 4 (6/15)

RECIPES:

The control can hold up to 18 saved recipes .

To save a recipe:

1 . Press and hold both the TIME button and the knob

for 5 seconds. The screen will be flashing. This is the

setup menu .

2 . Turn the knob through the menu until you get to

"Edit" .

3 . Press the knob and turn to the recipe you want to edit .

There are 18 blank recipes to customize and save .

4 . Press the knob and enter the cook, hold and time

values .

5 . After the entering the final value, "Edit" will show

again .

6 . Press the knob to edit more recipes or turn to "End" to

exit the menu .

To use one of the recipes:

1 . Push one of the three RECIPE group buttons for the

recipe number you want .

2 . Turn the knob to the recipe you want and press the

knob to select .

3 . Press the START button to preheat .

4 . After it shows "READY", press the START button

again to begin the recipe .

Note: The display button will cycle through all the values

as before, but will include the recipe number, if

using a saved recipe .

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

FL-2373

OPERATING INSTRUCTIONS, continued

5925 Heisley Road • Mentor, OH 44060-1833

Quick Recipe Note:

You can set "Quick Recipes" for recipes that you use

often . This way, when you press a recipe group button and

press start, that recipe will start cooking without searching

for the recipe number . Recipe numbers can be set up as

"quick recipes" as follows:

1 . Press and hold both the TIME button and the knob for

5 seconds to get into the menu .

2 . Turn the knob to "RBTN" and press the knob . The

word "PUSH" will flash.

3 . Press one of the recipe group buttons to assign a

recipe .

Note: Recipe numbers 1-6 can be set up as Group button 1 .

Recipe numbers 7-12 can be set up as Group button 2 .

Recipe numbers 13-18 can be set up as Group button 3 .

4 . Turn the knob to the recipe number you want to assign

to that button and press the knob .

Repeat the process to assign recipes to the other two recipe

group buttons; or,

turn the knob to "END" the submenu; turn to "END" the

menu .

Additional Menu Settings:

Press and hold both the TIME button and the knob for 5

seconds to get into the menu .

Here you can set the recipes, quick recipes, temperature

units (°C or °F) and the datalog

settings (USB connection required):

"RECE" allows you to enable or disable the data record

feature .

"RECF" allows you set how often (in minutes) a

datapoint will be recorded .

"RECD" allows you to set how long (in days) you

would like the data to be stored in memory .