Diginet RAPIX DGOZ-LLS-M Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör Diginet RAPIX DGOZ-LLS-M herunter. Diginet RAPIX DGOZ-LLS-M 8 Seiten. Light level sensor with three inputs for pir sensors
Seite drucken
RAPIX Lighting Control System
6. Possible operational setups:
• 'Daylight harvesting', where DALI luminaires connected to a RAPIX Lighting Control System are dimmed up or
down to maintain a required illuminance (Lux) level on a desktop.
• Set PIR sensor operation based on Light Level, for example: movement detected by PIR turns a RAPIX Zone on,
but only in dark; or movement detected by PIR turns a RAPIX Zone on, but only in light.
• Stepped light level response to allow different events to occur on a RAPIX Lighting Control System at different
light levels.
• Sunset/sunrise switch operation. For example light switches on at low light/night/dusk and off for sunrise
/daylight.
• Enable/disable the Light Level Sensor.
• Enable/disable PIR's connected to the Light Level Sensor.
7. Mounting the Light Level Sensor
The RAPIX Light Level Sensor can be mounted in any electrical accessory plate than accepts standard
Australian/New Zealand electrical accessory plates with a standard Australian mechanism aperture. For example,
Clipsal 2000™ or C2000™.
RAPIX Light Level Sensor can be installed into any electrical
accessory with a standard Australian plate aperture
Light Level Sensor installed in Australian wall plate
RAPIX Light Level Sensor
3