Cisco 200E Series Schnellstart-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Cisco 200E Series herunter. Cisco 200E Series 13 Seiten. Advanced smart switches

Seite drucken
Enter a new password between 1 and 64 characters (depending
S
8
TEP
upon the Password Strength setting) and confirm the password.
Password complexity is enabled by default. The password
N
OTE
must comply with the default complexity rules or it can be disabled
temporarily by selecting Disable Password Strength Enforcement.
Make sure that any configuration changes made are saved
C
AUTION
before exiting from the web-based interface by clicking on
the Save icon, then clicking Apply. Exiting before you save
your configuration will result in all changes being lost.
The Getting Started window displays. You are now ready to configure the
switch. Refer to the
Administration Guide
Use the console port
To configure the advanced smart switch:
Connect a computer to the switch console port using the provided
S
1
TEP
console port cable.
Start a console port utility, such as HyperTerminal, on the
S
2
TEP
computer.
Configure the utility with the following parameters:
S
3
TEP
•
115200 bits per second
•
8 data bits
•
no parity
•
1 stop bit
•
no flow control
Enter the default login information:
S
4
TEP
The default username is cisco, and the default password is cisco.
If this is the first time that you have logged on with the default
S
5
TEP
username and password, you must change the password.
Enter a new password between 1 and 64 characters (depending
S
6
TEP
upon the Password Strength setting) and confirm the password.
Password complexity is enabled by default. The password
N
OTE
must comply with the default complexity rules or it can be disabled
temporarily by entering "y" to the "override the password
complexity check" question.
6
Cisco Small Business Advanced Smart Switch
for further information.
200E Series Advanced Smart Switches