Cisco 3020 - Cisco Catalyst Blade Switch Installationshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Cisco 3020 - Cisco Catalyst Blade Switch herunter. Cisco 3020 - Cisco Catalyst Blade Switch 21 Seiten. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Auch für Cisco 3020 - Cisco Catalyst Blade Switch: Handbuch "Erste Schritte (37 seiten), Handbuch "Erste Schritte (31 seiten), Quickspecs (12 seiten), Freigabemitteilung (41 seiten), Freigabemitteilung (27 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (21 seiten)

Seite drucken
Cisco 3020 - Cisco Catalyst Blade Switch Installationshandbuch
Chapter 2
Switch Installation
Wait for the switch module to complete POST. It might take several minutes for the switch module to
Step 1
complete POST.
Verify that POST has completed by confirming that the system and status LEDs remain green.
Step 2
If the switch module fails POST, the system LED turns amber. If the POST fails, see the
Step 3
POST Results" section on page 3-1
Cisco Systems immediately if your switch module fails POST.
Step 4
Wait approximately 2 minutes for the switch module to get the software image from its flash memory
and begin autoinstallation.
Step 5
Using a PC that is connected to the same network segment as the blade server Onboard Administrator,
access the Onboard Administrator in a browser window.
Click Enclosure > Interconnect Bays to open the Interconnect Bay Summary window where you can
Step 6
find the assigned IP address of the switch module fa0 interface in the Management URL column. (See
Figure
Figure 2-8
Click the IP address hyperlink for the switch module from the Management URL column to open a new
Step 7
browser window. The Device Manager window for the switch module opens.
On the left side of the Device Manager GUI, click Configuration > Express Setup.
Step 8
OL-8914-02
2-8.)
HP Onboard Administrator Window
to determine a course of action. POST errors are usually fatal. Call
Cisco Catalyst Blade Switch 3020 for HP Hardware Installation Guide
Running Express Setup
"Understanding
2-13