Byetta PEN Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Insulin-Pen Byetta PEN herunter. Byetta PEN 12 Seiten.

Seite drucken

STEP E Complete New Pen Setup

•

Turn dose knob away from

you until it stops and the

is in the dose window.

Note: If you cannot turn the dose knob, see Commonly Asked Questions, number 7, in Section 4 of user manual.

Section 3

Now that you have done the one-time-only new pen setup, follow Section 3 for all of your injections.

STEP 1 Check the Pen

•

Wash hands prior to use.

•

Check pen label to make sure it

is your 10 mcg pen.

•

Pull off the blue pen cap.

STEP 2 Attach the Needle

•

Remove paper tab from outer

needle shield.

•

Push outer needle shield containing

the needle straight onto pen, then

screw needle on until secure.

STEP 3 Dial the Dose

•

Check that the

dose window. If not, turn

dose knob away from you

(clockwise) until it stops and

the

is in the dose window.

Note: If you cannot turn the dose knob away from you to the

Section 4 of this user manual.

BYETTA

•

For routine use, do not

repeat this one-time-only

new pen setup. If you do,

you will run out of BYETTA

before 30 days of use.

•

Check BYETTA in the cartridge.

•

The liquid should be clear,

colorless, and free of particles.

If it is not, do not use.

•

Pull off outer needle shield.

Do not throw away.

•

Pull dose knob out until

is in the

it stops and the

dose window.

(exenatide) injection

ROUTINE USE

is in the

, see Commonly Asked Questions, number 7, in

•

You are now ready for your first

dose of BYETTA.

•

Go to Section 3, Step 3, for

instructions on how to inject

your first routine dose.

Note: Small air bubbles will not

harm you or affect your dose.

•

Pull off inner needle shield

and throw away. A small drop

of liquid may appear. This is

normal.

•

Turn dose knob away from

you until it stops at

Make sure that the 10 with

the line under it is in the

center of the dose window.