Byetta PEN Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Lápiz de insulina Byetta PEN. Byetta PEN 12 páginas.
Imprimir páginaSTEP E Complete New Pen Setup
•
Turn dose knob away from
you until it stops and the
is in the dose window.
Note: If you cannot turn the dose knob, see Commonly Asked Questions, number 7, in Section 4 of user manual.
Section 3
Now that you have done the one-time-only new pen setup, follow Section 3 for all of your injections.
STEP 1 Check the Pen
•
Wash hands prior to use.
•
Check pen label to make sure it
is your 10 mcg pen.
•
Pull off the blue pen cap.
STEP 2 Attach the Needle
•
Remove paper tab from outer
needle shield.
•
Push outer needle shield containing
the needle straight onto pen, then
screw needle on until secure.
STEP 3 Dial the Dose
•
Check that the
dose window. If not, turn
dose knob away from you
(clockwise) until it stops and
the
is in the dose window.
Note: If you cannot turn the dose knob away from you to the
Section 4 of this user manual.
BYETTA
•
For routine use, do not
repeat this one-time-only
new pen setup. If you do,
you will run out of BYETTA
before 30 days of use.
•
Check BYETTA in the cartridge.
•
The liquid should be clear,
colorless, and free of particles.
If it is not, do not use.
•
Pull off outer needle shield.
Do not throw away.
•
Pull dose knob out until
is in the
it stops and the
dose window.
(exenatide) injection
®
ROUTINE USE
is in the
, see Commonly Asked Questions, number 7, in
•
You are now ready for your first
dose of BYETTA.
•
Go to Section 3, Step 3, for
instructions on how to inject
your first routine dose.
Note: Small air bubbles will not
harm you or affect your dose.
•
Pull off inner needle shield
and throw away. A small drop
of liquid may appear. This is
normal.
•
Turn dose knob away from
you until it stops at
Make sure that the 10 with
the line under it is in the
center of the dose window.
22
.